MFS1S00-VxxxE QSFP-200GB-AOCxxM-IB 200GbE QSFP56 InfiniBand HDR MMF Active Optical Cable
主要特性：
- - 200GbE data rate
- - 4x 50Gb/s PAM4 modulation
- - Programmable Rx output amplitude and pre-emphasis
- - SFF-8665 compliant QSFP56 port
- - Single 3.3V power supply
- - 4.35W power dissipation (typ., each end, with retiming)
- - Enables BER (Bit Error Rate) better than 1E-15 with Mellanox systems
- - Up to 100m length
- - Hot pluggable
- - RoHS compliant
- - SFF-8636 compliant I2C management interface
Mellanox® MFS1S00-VxxxE is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cable (AOC) designed for use in 200Gb/s Ethernet systems. MFS1S00-VxxxE AOC offers high port density and configurability, and a much longer reach than passive copper cables in the data centers. Since the AOC is hot pluggable, it is easy to install and replace.
MFS1S00-VxxxE has a standard SFF-8665 compliant QSFP56 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 50Gb/s.
MFS1S00-VxxxE offers selectable retiming per lane for both its optical transmitters and receivers up to 50Gbp/s rates.
Rigorous production testing ensures the best out-of-the-box installation experience, performance and
durability.
Mellanox’s unique quality active fiber cable solutions provide power-efficient connectivity for data center interconnects. They enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers.
Table 1 - Absolute Maximum Ratings
|
Parameter |
Minimum |
Maximum |
Units |
|
Supply voltage |
-0.3 |
3.6 |
V |
|
Data input voltage |
-0.3 |
3.465 |
V |
|
Control input voltage |
-0.3 |
4.0 |
V |
|
Damage threshold |
3.4 |
--- |
dBm |
|
Storage temperature |
-40 |
85 |
°C |
Table 2 - Operational Specifi
|
Parameter |
Minimum |
Typical |
Maximum |
Units |
|
Supply voltage (Vcc) |
3.135 |
3.3 |
3.465 |
V |
|
Power dissipation (each end, retiming on all lanes) |
--- |
4.35 |
4.55 |
W |
|
Supply noise tolerance (10Hz-10MHz) |
66 |
--- |
--- |
mVpp |
|
Operating case temperature |
0 |
--- |
70 (1) |
°C |
|
Operating relative humidity |
5 |
--- |
85 |
% |
Note 1. Internal temperature readout through DDMI of up to 75°C is allowed.
Table 3 - Cable Mechanical Specifi
|
Parameter |
Value |
Units |
|
|
Diameter |
3 ± 0.2 |
mm |
|
|
Minimum bend radius |
30 |
mm |
|
|
Length tolerance |
Length < 5m: |
+300mm /-0 |
m |
|
5m £ Length < 50m: |
+500mm /-0 |
||
|
50m £ Length: |
+1000mm /-0 |
||
|
Cable color |
Aqua |
-- |
|
Note 1. See Figure 1 for the cable length definition.
Table 4 - Part Numbers and Descriptions
|
Part Number |
Description |
|
MFS1S00-V003E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 3m |
|
MFS1S00-V005E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 5m |
|
MFS1S00-V010E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 10m |
|
MFS1S00-V015E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 15m |
|
MFS1S00-V020E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 20m |
|
MFS1S00-V030E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 30m |
|
MFS1S00-V050E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 50m |
|
MFS1S00-V100E |
Mellanox® active fiber cable, 200GbE, 200Gb/s, QSFP56, LSZH, black pulltab, 100m |
